Meyra 2.432 Spezifikationen PDF herunterladen (Seite 11)

11

GB

Taking off the legrests

Benefits:

– Easy transfer into and out of the

wheelchair.

– Foot and side areas are free, no

stumbling

– Reduced length of the wheelchair -

important for storing wheelchair

Handling:

– Move the brake release lever into

the "drive" position. – This prevents

the wheelchair from rolling away

accidentally.

– Remove lower leg strap, if present.

– Remove both feet from the foot pla-

tes

– Fold up foot plates [6] (Fig.11).

– Push locking lever (A) forward

(Fig.12) – Legrests have now been

released.

– Turn legrests [5] to the side slightly

and pull up and off (Fig.14).

Note!

After replacing the legrests do not for-

get to check that they are securely

locked in place! – Check the lok-

king points!

Adjusting the length of the legrests

The legrests can be adjusted via a tele-

scopic tube.

Benefits:

– Individual adjustment of the legrest to

the length of your lower leg

Handling:

Tools

1 x hexagonal stud wrench (width 4

mm)

– Switch off the wheelchair and move

the brake release lever to the "drive"

position. – This will prevent the

wheelchair from inadvertently rolling

away.

– Loosen adjustment screw (A, Fig.

15).

– Extend the lower part of the legrest

with footrest (6) to the desired

length.

Only extend the legrest as far as

the guiding mark!

Observe minimum insertion depth of

5 cm (10 cm for Code 91).

– Tighten the adjusting screw (A, Fig.

15)

Depth adjustable footplates

Loosen the two adjusting screws (B, Fig.

10) on each side. After adjusting the

depth of the fooplate, tighten the adju-

sting screws (B).

Height adjustable legrests

Code 91

(Fig.16)

Benefits:

– Adjustment to accommodate stiff

joints, e.g. in the case of a knee inju-

ry, through plaster splint.

– Reduction of the seat pressure. –

Through shift of weight.

– Optimal relaxation of the muscles. –

Through continuous adjustment.

Handling:

– Move the brake release lever into

the "drive" position. – This will pre-

vent the wheelchair from inadvertent-

ly rolling away.

– Sit in the wheelchair and ask a hel-

per to lift the legrest to the required

level (Fig.17).

– To lower the legrest take the pressu-

re off for a moment by lifting the lo-

wer leg (helper) and then pressing

the operating lever forward (A,

Fig.17).

Note!

Never put the free hand into the

adjustment mechanism

while adju-

sting the height adjustable legrest.

–

Danger of crushing!

LEGRESTS

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare