Meyra 2.432 Spezifikationen PDF herunterladen (Seite 18)

18

SERVICE

Maintenance

Like any other technical product, your

POWER PRIMUS II requires mainte-

nance. The following maintenance in-

struction table shows the measures to be

implemented so that you can fully enjoy

the benefits of your wheelchair for a

long time to come (e.g. operating safe-

ty, high kilometric performance).

Note:

Do not clean the wheelchair using

a high-pressure cleaner – Danger

of short circuit!

Water jets can cause damage to the

electronics and the control box.

Care

Seat and backrest cover:

Clean the covers with warm water. In

the case of stubborn soiling, the fabric

can be washed with a standard washing

powder for delicate fabrics. Spots can

be removed with a sponge or a soft

brush.

Note:

Do not use aggressive cleaning agents

e.g. solvents, or hard brushes etc.

Rinse with clear water and let get dry.

Plastic parts:

The footrests, battery holder etc. are

made of high-quality plastic. Take care

of these by means of standard plastics

cleaning agents. Always observe the

specific product information.

Finish:

The high quality finish ensures an opti-

mum of protection against corrosion. If

the surface finish is damaged by scrat-

ches or similar, touch it up with a varnish

pen available from us. Occasional ap-

plication of a light cover of oil to all

moving parts (see also Maintenance In-

structions) will ensure that your

wheelchair will give you many years of

service.

Spare parts

Only use ORIGINALMEYRA spareparts.

Repairs

If any repairs are required, please con-

tact your specialist workshop. Personnel

there are well trained to carry out the

work required.

Customer Service

Should you have any enquiries or need

any assistance, please contact your local

MEYRA specialized dealer, who has

been trained in our factory in accordan-

ce with our guidelines and who can offer

advice, customer service and repairs.

We have a dealer network of approx.

In this way all wishes can be fulfilled.

BATTERIES

Charge the batteries:

– before long tours

– after long periods of disuse

– when LEDs 1-4 only are illuminated

on the battery display (19) (Fig. 55).

– and, at latest, when only one LED is

flashing.

It is best to charge the battery overnight.

Full recharging of the batteries takes 12

to 15 hours.

Note!

Only use a battery charger which is

designed for the battery in question! –

Otherwise, the batteries may be de-

stroyed.

See the section entitled "Pre-Operati-

on Checks"

Charging procedure

Attention:

The 100% charging of maintenance-

free batteries is only possible for phy-

sical reasons over an extremely long

charging period (>36 hours). If the

battery display indicates that the bat-

tery is fully charged, this corresponds

to 90-95% of nominal capacity.

Recharge the batteries as often as

possible.

– Switch off the wheelchair and move

the brake release lever to the "drive"

position. – This prevents the

wheelchair from rolling away acci-

dentally.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare